Description:

With the Exmark Turf Tracer S-Series commercial walk-behind mower, you can choose from a variety of rugged engines. Then, match that power to cutting decks in 36-, 48-, and 52-inch widths. In whatever configuration you choose, you’ll get our patented Enhanced Control System (ECS) for ultimate operator comfort. Which translates to day-long operator productivity.

Specifications:

• UPC: 193308240961
• Starter: Electric
• Steering Control: Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right, or zero-turn
• Front Caster Tires: 9 x 3.5-4, smooth-tread, semi-pneumatic
• Drive Tires: 16 x 7.5-8, 4-ply Turf Master®
• Safety Package: Operator Presence Controls (OPC), speed control lever must be in neutral, and blades disengaged to leave the operator's position without stopping the engine
• Parking Brake: Lever-actuated mechanical compression
• Electrical: 12-volt battery with 15-amp alternator
• Standard Features: Engine hour meter

Transmission

• Transmission Speeds: Infinitely variable
• Transmission Brand: Hydro-Gear
• Transmission Type: Hydrostatic
• Drive: Hydro-Drive
• Drive Description: Twin Hydro-Gear variable-displacement pumps and twin high-efficiency Parker/Ross wheel-drive motors with 1" (2.54 cm) tapered shafts
• Transmission Speed: Infinitely variable speed selection from 0–6.2 mph (10 kmph) forward, 0–2.2 mph (3.5 kmph) reverse

Engine

• Engine Brand: Kawasaki
• Engine Model: FS600V
• Engine Displacement: 603 cc
• Engine Series: V-Twin
• Engine Spec: AS26-R
• Engine Speed: 3,600 rpm
• Fuel System: Carbureted
• Fuel Type: Gas Carbureted
• Air Filter: Standard engine manufacturer's air filter
• Fuel Capacity: 5-gallon (18.9 L) fuel tank
• PTO Engagement: Electromagnetic 105 ft-lbs clutch

Deck

• Deck Style: Floating Deck
• Deck Style Description: Full-floating UltraCut Series 3, side discharge standard, with molded discharge chute and option to bag or mulch
• Width / Cutting Deck: 36"
• Deck Construction: 10-gauge top, formed and continuously seam-welded; 7-gauge side skirt and welded spindle mounting locations
• Cutting Heights: 1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments
• Blades: 2 blades, each 18" in length
• Blade Tip Speed: Approximately 18,500 fpm
• Blade Spindles: No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with a 25mm (.98") spindle shaft and splined blade driver

Additional Features

• Drive Wheel Release: Allows unit movement without the engine running
• Fuel Indicator: None
• Deck Lift: Manual lift with hairpin adjustment
• Carb Compliant: No